3D Printing Club

3D Printing Club 3DPC ~ All things 3D Printing - building a vibrant community of Maker's and Innovators! https://3dprinterchat.com/ 3D Printing Club #best3DClub Welcome to worlds largest and best 3D Printing Club !
(31)

Website: https://3DPC.tech/ Join us here on Facebook and make sure to follow our page: https://www.facebook.com/3dPrintingClub/?fref=ts Follow us on Twitter: @The3DPC Follow us on Instagram: @The3DPrintingClub7 3D Printing Club reserves the right to republish anything posted or shared here on the website: ww.3DPC.tech

Mission: Host a community of makers enthusiasts and entrepreneurs. Supporting members in the use and selection of 3D printers by publishing current news and reviews. Grow our educational entity hosting 3D Printing Club for Teachers and Schools around the world. Blend our 3D Print Laser and Milling entity into the mix with the club. Have 3DPC.tech Become a 501 (c) 7 Social Club status in 2018.

Operating as usual

FINALLY getting into airbrush painting. I know very little about the tools and accessories but this is what I bought to ...
01/31/2021

FINALLY getting into airbrush painting. I know very little about the tools and accessories but this is what I bought to start. Keep in mind it's a “starter” set-up. If I can paint later on I'll spend $ for a better brush. The brush is a Iwata NEO N4500, booth has 6’ hose and led lighting.

Janet
01/13/2021

Janet

Hi 3D Printing Club Members! On behalf of #Wi3DPNextGEN, I was curious if you would be interested in joining our virtual event 'Meet the 3D Printing Stars' that will take place, Thurs. Jan 21 at 7 PM - 9 PM EST. Meet women budding in their careers who are paving the way with 3D Printing to design shoes, aerospace parts to everyday things we take for granted across brands we love: LEGO, SpaceX, Facebook, New Balance & Tapestry (kate spade new york, Coach & Stuart Weitzman).

Registration link: https://live.remo.co/e/wi3dp-next-gen
Date/Time: Thursday, Jan 21st from 7:00 - 9:00 pm EST

**Moderator: **Karina Popovich, Head of Education & Policy at Wi3DP Next Gen

Our Panelists:
- Anna Kathryn Chase, Technology Innovation Engineer - Additive Design & Manufacturing, LEGO

- Lana Alise Hejret, 3D Printing and Fabrication Specialist, Facebook

- Marcelle Durrenberger, Innovation Engineer, New Balance

- Alanna Strub, Additive Manufacturing Engineer, SpaceX

- Ashley Alleyne, 3D Printing Assistant from Tapestry (Coach, Kate Spade, & Stuart Weitzman)

Who can join?
Serving youth of all genders from middle school, high school to university students.

Professionals are welcome, but we'll expect you to share your experience with the next generation! Thanks in advance!

Registration link: https://live.remo.co/e/wi3dp-next-gen
#wi3dpnextgen #STEM #3dprinting

@theinstituteof3dprinting The Institute of 3D Printing - Cause and Effect (should be “Effect and Cause”,lol) check it ou...
12/03/2020
Free Checklist Download

@theinstituteof3dprinting The Institute of 3D Printing - Cause and Effect (should be “Effect and Cause”,lol) check it out.

3D Printing - You’ve got the tools. You’ve got some experience. But you’re still getting stuck.

Let’s make it simple:
• Ghosting = Loose belts = Check belts turn freely without excessive slack
• Hear popping = Damp filament = Dry filament in dryer or oven
• Lacking strength = Incorrect print orientation = Orientate along layer lines

These are just a few of the 27 checks included in the checklist, all with effects & suggestions to get you troubleshooting without the stress. Yours to keep and reference, click download now!

Get it now ➡️ https://io3dp.krtra.com/t/aKkl3sfI5HoQ

3D Printing made simple.

Feel free to join our Discord! https://discord.gg/GWJcTvc We work with 3D Printer Chat since this week to reinvent the c...
09/10/2020
Join the 3D PRINTER CHAT OFFICIAL Discord Server!

Feel free to join our Discord! https://discord.gg/GWJcTvc We work with 3D Printer Chat since this week to reinvent the core structure of The greatest 3D Printing Group in the world! ---> 3D Printing Club

Check out the 3D PRINTER CHAT OFFICIAL community on Discord - hang out with 30 other members and enjoy free voice and text chat.

09/04/2020
Photos from 3D Printing Club's post
09/04/2020

Photos from 3D Printing Club's post

Photos from 3D Printing Club's post
09/04/2020

Photos from 3D Printing Club's post

Good work, good policies, procedures and I wish the industry would follow @Creality3D standards. Sharing to the Clubhous...
08/29/2020

Good work, good policies, procedures and I wish the industry would follow @Creality3D standards. Sharing to the Clubhouse.

❤️❤️❤️Announcement Letter of CR-6 SE

08/26/2020

Anet 3D Printers please point to the “Forum” your asking us to join.

On August, 28th, the first 100 users who registered in Anet forum will get our latest model A8E 3D printer.

3D Printers please point to the “Forum” your asking us to join.

Users only need to upload an article about the unbox experience of the new machine on our official website to get this new product, for free of course!

Don’t be discouraged if you miss the 100! After buying this new model at half price, you only need to upload the user experience within one week, and you can also get it for free.

The detailed method is, after our new model launched, there will be 1,000 promotional models, and the event quota is 100 free. Follow-up users who buy-in at half price can get free qualifications by publishing the user unboxing experience on our official website. Coupons with the same amount will be issued to your user center at that time. Come and register, take this machine back home! The coupons issued can be used to purchase machines and consumables, and more surprises are waiting for you. Come and join our event now!

“One project however stands head and shoulders above others for its disaster: in magnitude of failure; amount of money l...
08/08/2020
Chris Russell🏝Practical Printing on Twitter

“One project however stands head and shoulders above others for its disaster: in magnitude of failure; amount of money lost; and emotional turmoil. It has been called the biggest 3D printing scam of all time, taking $2.3 million from 16,180 backers. For the next four years, they relentlessly teased supporters that they were days from receiving their printer, just to let them down again.” - Chris Russell
https://twitter.com/crussty/status/1292156967339749376?s=21

“Hey @makersmuse, @joeltelling.... Remember these guys??? https://t.co/R3wSvYMjcs”

07/29/2020
An Endurance 15 watt dual laser system attachment

15W 3D Printer Laser Attachment Module GIVEAWAY!!!

The Endurance 15 Watt dual laser system attachment for your 3D printer / CNC machine The most powerful laser module on the market! Compatible with all 3D printers and CNC machines.

Marlin 2.0.6Latest release 2.0.6 @thinkyhead thinkyhead released this 11 hours ago · 0 commits to 2.0.x since this relea...
07/27/2020
Release Marlin 2.0.6 · MarlinFirmware/Marlin

Marlin 2.0.6
Latest release
2.0.6

@thinkyhead thinkyhead released this 11 hours ago · 0 commits to 2.0.x since this release

“For this release we focused on compatibility with a wider range of boards and controllers, especially STM32-based boards, color screens, and touch screens. With so many new files being added, a lot of work has gone into optimizing the PlatformIO build by peeking at enabled features...”

https://github.com/MarlinFirmware/Marlin/releases/tag/2.0.6

For this release we focused on compatibility with a wider range of boards and controllers, especially STM32-based boards, color screens, and touch screens. With so many new files being added, a lot...

07/11/2020
Digital Doctor on Twitter

Scientists Have 3D-printed a Working Heart!

“Scientists Have 3D-printed a Working Heart! #DigitalHealth #HealthTech #IoT #3Dprinting #Innovation @Akwyz @jblefevre60 @JohnNosta @DrJDrooghaag @HaroldSinnott @debraruh @SpirosMargaris @HealthcareWen @RasuShrestha @evankirstel @IrmaRaste @ipfconline1 https://t.co/pgckfmPSj3”

SALE on the Tenlog 3D TL-D3 Pro IDEX model. Use code: SUMMERSALES
06/29/2020

SALE on the Tenlog 3D TL-D3 Pro IDEX model.
Use code: SUMMERSALES

Tenlog Dual Extruder 3D Printer TL-D3 PRO Summer sales

Davide
06/03/2020
Davide

Davide

If anyone in this group is interested in the #sustainability of industrial #additivemanufacturing we have just published a new eBook on 3D Printing Media Network. It is absolutely free to view online or download, no registration required.

Thank you Nano Materials and Processes, Inc., for the 16 plus spools helping to produce over 5,400 face shields with the...
06/02/2020

Thank you Nano Materials and Processes, Inc., for the 16 plus spools helping to produce over 5,400 face shields with the help of Insanity Automation, Livonia Public Schools Grounds and Maintenance Crew, Strategic Staffing Solutions and Tenlog 3D.
AL says: “We did a good thing”. Watch for Als article he says “there are so many to credit that deserve recognition, the whole team was exemplary”.

It's Community Health Improvement Week!

This year’s CHI Week celebration recognizes and honors hospitals and communities coming together to make human connections to care for people and keep them safe during these unprecedented times.

Throughout the week, AHA will share stories about hospitals and community-based organizations joining efforts to protect the health of their communities, as well as everyday people supporting hospitals and each other with acts of kindness. Learn more at: aha.org/chiweek

NanoMPI would like to take this time to recognize the continued efforts of a small but determined group of individuals from Metro Detroit who came together to help keep healthcare professionals, first responders and other frontline workers safe by 3D printing, assembling and distributing over 3,600 face shields. NanoMPI is proud to support their ongoing efforts.

If you're able to lend a hand or make a donation please contact Al Shuryan, founder of the 3D Printing Club. Monetary donations may be made via paypal: [email protected]

We want to hear your stories of human connections that you've been involved in or heard about through others. Share your story in the comment section below and let's spread a little love!

#NanoMPI #nanodiamond #chiweek #healthcareheroes #humanconnection #COVID19 #communityhealth #weareallinthistogether @ahahospitals @communityhlth

Dual X-Carriage 3D Printer,TENLOG3d,www.tenlog3d.comFor Wholesale/Distribute/Resell: info@tenlog3d.comFor Review/Sponsor...
05/16/2020

Dual X-Carriage 3D Printer,TENLOG3d,www.tenlog3d.com
For Wholesale/Distribute/Resell: [email protected]
For Review/Sponsor/Media/Marketing cooperation: [email protected]

TENLOG official US distributor and repair center!!! www.lnlsolution.com

High Speed
High Precision
Linear X and Y Rails
Dual Z
Material Out Sensor
Dual IDEX Extruders
- Mirror Print
- Duplicate Print
- Multi Color Print
- Multi Material Print
Auto Leveling
Fast Warm Up
Quiet Operation...

05/14/2020
LOVE on a hot bed

Love on a hot bed at the Clubhouse.
“LOVE” picture frame from thingverse.
Printed on the Tenlog 3D TL-D3 PRO IDEX printer.
Today is the first day not printing PPE.
Mother’s Day gifts.

Fantastic team serving S.E. Michigan and Metro Detroit.  Over 4,500 Face Shields plus
05/11/2020

Fantastic team serving S.E. Michigan and Metro Detroit. Over 4,500 Face Shields plus

Mask, Ear Savers and Shields Report

These last 2 weeks,
we have given out 525 shields and 130 ear savers. I’ve lost track of how many shields and ear savers total. My guess would be about 4,500 shields and 450 ear savers. Shout out to Jean Condron, David Menzel, Tracy Radenmacher, Al Shuryan, Samir Rawashdeh, Lisa Burt, The Ann Arbor, MIchigan Public School District’s Engineering Teachers, Gary Scott, and all of the shield teams!
We have gathered and are giving out 1678 masks this week. We have made and distributed a grand total of 5,731 masks!!!
A huge thank you to everyone that has helped in any way with the masks, shields and ear savers! This group was started to help in some small way but instead we are helping in a huge way in many states but especially all over the Metro Detroit area.
If I forget anyone that has helped, please add them under comments and I’ll add them. I’ve spent hours reviewing messages, texts and emails to try to find all names. I know porches or great smells of peoples homes when opening bags or picking up. Not faces and not all names.... All of you came together to make this flow so easy.
I project we will need to make masks for about 3 more weeks before our list is at zero. Then, I will keep up the mask group so that if we have further requests, we can see if any will meet them.
I thank you all so much for all you have done.
I sincerely hope to meet you all in the future.

Mask Makers

Diane Lantzy Mueller
Jenny Kroll
Debbie Madias
Jean Condron
Jaime Cilinceon-Williams
Lexie Krejcar
Anna Brault
Margareth Bastos
Erum Malik
Nicole Engel
June Waldbauer
Nikki Ward
Cindi McClenaghan
Dee Heinze
Revonda Kirby
Charlotte Schiller
Rebecca Robinette
Linda Locher
Pat Karevich
Manju Jakkula and her daughter
Archana Chavalla
Sujatha Katragadda
Sanjeeta Yerukola
Ratna Tadikamalla
Jyothsna Devi Tallapally
Kavita Malhotra Bhandari
Sridevi Govind
Sridevi Manepalli
Valeria Weekes
Anita Weekes
Stacie Juergens Rosol
Jamie Rosol
Gabriela Keller and her Mom
Penny Ngai Yee Lo
Donna Hartnett
Georgia Gillium
Gillian Beharry
Rachelle
Nicole Fear
Reggie Davidson
Cindy Peters Mom

Cutters

Sherrie Boughan
Kathy Jo Lowery
Brooke Lowery
Jayne Wessman
Hetal Joshi
Jeanie Dykstra
Denny Dykstra
Jill Hornick
Emily Mezgec
Jessica Bentley
Jean Hornick
Emily Mezgec
Cathy McFall
Gayle Grady
Charisse Nilles
Michelle Towler
Craig Towler
Cassia Pan

Drivers

Canton Grocery Group
Nicole Engel
Samir Rawashdeh
Denny Dykstra
Diane Drechnowicz
Hetal Joshi
Kelly Walling

Donors of all sorts from fabric, to supplies, to sewing machine to monetary

Lisa Zuber
Cassia Pan
Jayne Wessman
Diane Lantzy Mueller
Lexie Krejcar
Donna Hartnett
Val Sosnowski
Megan Briggs
Brian and Becky Radon
Hetal Joshi
Michelle and Craig Towler
Lisa Fry
Lisa Van Dyke
American Airlines Stewardesses
Roots Church Canton
Melissa Mulvaney
Pat Etchells
Lisa Zimmer
Kristine Vaughan
Nikki Ward
Mark Hall
Sheryl Rize
Christina Prentice
Angie Muscat
Stacey Rosol
Mary Beth Ofstedal
Garrett Financial Services
Debbe Yeager
Catherine Ashton
Lisa Benward
Ashley Paison
Ruth Anne
Noel Bittinger
Phil Rios
Anna Pan
Shahrukh Ahmed
Marcia Wilson
Kekki Lack
Shanda Downes-Taylor
Joe Lynn Alves
Danielle Malone
Samir Rawashdeh
James Hillel
Cheryl Snitchler
Stephanie Caldie
Riverside Rehabilitation
Pioneer Health Care
Charlotte Schmitt
Helen Kiesel
JTM Designs
Deepika Ray
Julia Roscoe
Lisa Spitler
Lester Garripee
Crystal McFarland
Lori Longeway
Sherrie Boughan

This week, our masks and shields are or have gone to Catholic Services Pantries, Wayne County Health Department, Warren Police Department, hospital lab, Seasons Hospice, and New Prospect Missionary Baptist Church Detroit.

We gave out 2000 KN95s also to 20 medical from hospitals to nursing homes to clinics, thanks to Third Wave Volunteers!!

My sincere and heartfelt thank you to everyone for making such a huge difference!

I want to thank MakerGear for sending a care/love package full of high quality face shield visor sheets and a bag of ear...
05/02/2020

I want to thank MakerGear for sending a care/love package full of high quality face shield visor sheets and a bag of ear savers. A small modification to the sheet and they make the NIH DtM-v4.0 Face Shield a very professional heavy duty shield great for field and outdoor use like police and other first responders. I’m proud to offer this style. Thank you MakerGear for helping me help Detroit and suburbs. We are over 4,000 face shields and thousands of masks given free to our hero’s.

MakerGear serious about 3D Printing when I’m putting my grandchild’s safety at risk. GO Detroit Red Wings!
05/01/2020
How 3D Printing Creates an Unrivaled Hockey Helmet

MakerGear serious about 3D Printing when I’m putting my grandchild’s safety at risk. GO Detroit Red Wings!

Despite technical advancements in everything from electric vehicles to smartphones, why are helmets still based on closed-cell foams and injection molded plastics? The extensive use of foam constrains the protective possibilities, and expensive tooling limits the number of available helmet sizes. KA...

From City of Detroit and all of the metro area we thank Tenlog 3D for the TenLog DL-3 dual IDEX extruder 300x300 machine...
04/29/2020

From City of Detroit and all of the metro area we thank Tenlog 3D for the TenLog DL-3 dual IDEX extruder 300x300 machine to help our community produce face shields for our essential workers.
THANK YOU!
I didn’t waste time after assembly and leveling.
First Print:
Speed is about 200mm/s, it has linear rails and dual Z .

Full Throttle Distillery 80% Alcohol sanitizer. From Full Throttle Saloon in Sturgis.
04/28/2020

Full Throttle Distillery 80% Alcohol sanitizer.
From Full Throttle Saloon in Sturgis.

Sue Turner, Rainbow’s Senior Business Analyst, started making masks before the official government recommendation was ma...
04/28/2020

Sue Turner, Rainbow’s Senior Business Analyst, started making masks before the official government recommendation was made that everyone should wear face coverings in public. Sue stated, “I felt like I had to contribute something, since I couldn’t help assist with direct client care. But I’m certainly not a seamstress!”

She found a pattern and started sewing and initially made 30 masks. When Sue dropped them off at Rainbow’s Vocational Rehab Campus in Ypsilanti, she offered to take a bag of what they had already cut and prepped. She sewed together another 40 masks. Sue’s family joined in on the project as well. Her elderly mother made a dozen or so and she even got her daughter to help iron.

But that’s not all... Sue reached out to some community boards that were testing their skills at making 3D face shields. It was early on in their production, so she was thrilled they considered my request. Separately, 3D printing club and Wolverine3D.com donated about a dozen shields to Rainbow.

#healthcarehero #thankahealthcareworker #rainbowrehab #covid19 #facemasks #3Dprinting #faceshields

Sue Turner, Rainbow’s Senior Business Analyst, started making masks before the official government recommendation was made that everyone should wear face coverings in public. Sue stated, “I felt like I had to contribute something, since I couldn’t help assist with direct client care. But I’m certainly not a seamstress!”

She found a pattern and started sewing and initially made 30 masks. When Sue dropped them off at Rainbow’s Vocational Rehab Campus in Ypsilanti, she offered to take a bag of what they had already cut and prepped. She sewed together another 40 masks. Sue’s family joined in on the project as well. Her elderly mother made a dozen or so and she even got her daughter to help iron.

But that’s not all... Sue reached out to some community boards that were testing their skills at making 3D face shields. It was early on in their production, so she was thrilled they considered my request. Separately, 3D Printing Club and Wolverine3D.com donated about a dozen shields to Rainbow.

#healthcarehero #thankahealthcareworker #rainbowrehab #covid19 #facemasks #3Dprinting #faceshields

Address


Alerts

Be the first to know and let us send you an email when 3D Printing Club posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 3D Printing Club:

Videos

3D Printing Club - 3DPC.tech

3D Printing Club #best3DClub Home of the 3DPC.tech Diamondized Nozzle Welcome to worlds largest and best 3D Printing Club ! Website: https://3DPC.tech/ Join us here on Facebook and make sure to follow our page: https://www.facebook.com/3dPrintingClub/?fref=ts Follow us on Twitter: @The3DPC Follow us on Instagram: @The3DPrintingClub7 3D Printing Club reserves the right to republish anything posted or shared here on the website: ww.3DPC.tech

Comments

Hi There. Looking for some help if possible. Im a newbie to printing and was bought an Ender 5 pro for Christmas. Ive had a lot of success with it and love the quality. Problem i am having now is spongey prints.... Ive read a ton of online stuff about why this might happen but what ever i do it wont go. Im using ERYONE 1.75mm PLA 0.4mm Head Nozzle - 200-210 Bed - 60 Any ideas on next steps would be greatly appreciated. Thanks in advance
Lemillion repeatedly displays the values ​​of a true hero. He risked his life and even sacrificed his Gift to protect Eri. Despite knowing how it would negatively affect her career, Mirio allowed her Gift to be destroyed in order to inspire Eri and fulfill her promise that she will never feel more pain. This wonderful, well-crafted work is available today with the guys from: www.zsculptors.com, 3D modeling and STL are available !!
Hopefully i get to install this later this week. Compressed air part cooling, and compressed air hot end cooling. Can you spot any thing else that's different?
After more than 7 months of no printing whatsoever I decided to clean it up and print a test cube and this is how it come off, any chance someone could help with some of the issues I see in this cube it looks mainly on the X axis the Y and Z axis seem really good to me at least 😁
Hi 3D Printing Club Members! On behalf of #Wi3DPNextGEN, I was curious if you would be interested in joining our virtual event 'Meet the 3D Printing Stars' that will take place, Thurs. Jan 21 at 7 PM - 9 PM EST. Meet women budding in their careers who are paving the way with 3D Printing to design shoes, aerospace parts to everyday things we take for granted across brands we love: LEGO, SpaceX, Facebook, New Balance & Tapestry (kate spade new york, Coach & Stuart Weitzman). Registration link: https://live.remo.co/e/wi3dp-next-gen Date/Time: Thursday, Jan 21st from 7:00 - 9:00 pm EST **Moderator: **Karina Popovich, Head of Education & Policy at Wi3DP Next Gen Our Panelists: - Anna Kathryn Chase, Technology Innovation Engineer - Additive Design & Manufacturing, LEGO - Lana Alise Hejret, 3D Printing and Fabrication Specialist, Facebook - Marcelle Durrenberger, Innovation Engineer, New Balance - Alanna Strub, Additive Manufacturing Engineer, SpaceX - Ashley Alleyne, 3D Printing Assistant from Tapestry (Coach, Kate Spade, & Stuart Weitzman) Who can join? Serving youth of all genders from middle school, high school to university students. Professionals are welcome, but we'll expect you to share your experience with the next generation! Thanks in advance! Registration link: https://live.remo.co/e/wi3dp-next-gen #wi3dpnextgen #STEM #3dprinting
So I am doing some experimenting. I am going to do a FDM print but need the infill to allow a resin to be poured into the entire print cavity and fill the entire print and surround the infill. Is there a FDM infill in cura that allows for this? I am thinking something more like a infill like chitubox does. Alternately I could take the model into Chitubox but it only adds the infill during slicing, can you export the model with infill from chitubox?
10K PLA for $120 including shipping for US customers
10KGg of PLA for $120 including shipping for US customers https://www.thecopierandtonerstore.com/
Dears friends , i want to share this 3D STL increibble that i see today and it's avalible in: www.zsculptors.com i want to break free , oh yeah i love that song!!
Don't waste time sanding your 3d prints, shave them. The best way to smooth your PLA prints.
Any clue what model of repraguru Prussia I3 this is?